1.Physical Datas:
| Type |
JL1172(Main Agent) |
GL1172(Curing Agent) |
| Composition |
-OH |
-NCO |
| Appearance |
Clear or light yellow transaprent liquid |
Clear or light yellow transaprent liquid |
| Solid content (%) |
72±2 |
72±2 |
| Viscosity at 25℃(mPa) |
5000±1000 |
500-2500 |
| Solvent |
Ethyl Acetate |
Ethyl Acetate |
| Mixing ratio |
20 |
20 |
| shelf life at 15℃-25℃ |
12 month |
12 month |
During dilution, solid content and viscosity change:
| Solid content (%) |
40 |
35 |
30 |
25 |
|
Main Agent (KG)
|
20 |
20 |
20 |
20 |
| Curing Agent (KG) |
20 |
20 |
20 |
20 |
| Ethyl acetate（KG） |
32 |
42.3 |
56 |
73.6 |
2.Applicable model:
Has an excellent composite effect on aluminum coated products.
Suitable for various speeds of dry laminating machines
3.Recommended ratio:
20:20. The actual environmental humidity and printing ink have a significant impact on the laminating effect. Customers should adjust the amount of curing agent appropriately according to the actual situation
4.Operating conditions:
(1) When diluting, add the solvent to the main agent according to the required solid content, stir it thoroughly,
(2)Then add the curing agent, and stir it evenly before use.
(3) The water content of the solvent ethyl acetate shall not exceed 0.03%, and the alcohol content shall not exceed 0.02%
(4) Working concentration 25%~35%
5.Drying:
The drying device should have sufficient air volume, wind speed and temperature. When the drying system is divided into three sections, the temperature from the membrane inlet to the outlet is controlled between 50~60℃, 60~70℃, and 70~80℃.
6.packaging specification:
JP1172：20kg/drum GP1172：20kg/drum
